YOKOGAWA WT3001E User Manual page 78

6.7 DISPlay Group
:DISPlay:MATH:MATH<x>:SCALing:CENTer
Function Sets the center value of the manual scaling of
the computed waveform or queries the current
setting.
:DISPlay:MATH:MATH<x>:SCALing:
Syntax
CENTer {<NRf>}
:DISPlay:MATH:MATH<x>:SCALing:
CENTer?
<x> = 1, 2 (MATH)
<NRf> = –9.9999E+30 to 9.9999E+30
:DISPLAY:MATH:MATH1:SCALING:
Example
CENTER 0.0000E+00
:DISPLAY:MATH:MATH1:SCALING:CENTER?
-> :DISPLAY:MATH:MATH1:SCALING:
CENTER 0.0000E+00
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• This command is valid when the scaling
mode of the computed waveform
( :DISPlay:MATH:MATH<x>:SCALing:
MODE ) is set to "MANual."
:DISPlay:MATH:MATH<x>:SCALing:MODE
Function Sets the scaling mode of the computed waveform
or queries the current setting.
:DISPlay:MATH:MATH<x>:SCALing:
Syntax
MODE {AUTO|MANual}
:DISPlay:MATH:MATH<x>:SCALing:MODE?
<x> = 1, 2 (MATH)
:DISPLAY:MATH:MATH1:SCALING:
Example
MODE AUTO
:DISPLAY:MATH:MATH1:SCALING:MODE?
-> :DISPLAY:MATH:MATH1:SCALING:
MODE AUTO
Description This command is valid only on models with the
advanced computation function (/G6 option).
6-34
:DISPlay:MATH:MATH<x>:SCALing:SDIV
Function Sets the scale/division value of the manual
scaling of the computed waveform or queries the
current setting.
:DISPlay:MATH:MATH<x>:SCALing:
Syntax
SDIV {<NRf>}
:DISPlay:MATH:MATH<x>:SCALing:SDIV?
<x> = 1, 2 (MATH)
<NRf> = –9.9999E+30 to 9.9999E+30
:DISPLAY:MATH:MATH1:SCALING:
Example
SDIV 2.5000E+01
:DISPLAY:MATH:MATH1:SCALING:SDIV?
-> :DISPLAY:MATH:MATH1:SCALING:
SDIV 25.000E+00
Description • This command is valid only on models with the
advanced computation function (/G6 option).
• This command is valid when the scaling
mode of the computed waveform
( :DISPlay:MATH:MATH<x>:SCALing:
MODE ) is set to "MANual."
:DISPlay:MATH:MATH<x>:UNIT
Function Sets the unit to be added to the result of the
waveform computation or queries the current
setting.
:DISPlay:MATH:MATH<x>:
Syntax
UNIT {<String>}
:DISPlay:MATH:MATH<x>:UNIT?
<x> = 1, 2 (MATH)
<String> = Up to 8 characters
:DISPLAY:MATH:MATH1:UNIT "W"
Example
:DISPLAY:MATH:MATH1:UNIT? ->
:DISPLAY:MATH:MATH1:UNIT "W"
Description This command is valid only on models with the
advanced computation function (/G6 option).
IM WT3001E-17EN