YOKOGAWA WT3001E User Manual page 79

:DISPlay:MODE
Function Sets the display mode or queries the current
setting.
:DISPlay:MODE {NUMeric|WAVE|BAR|
Syntax
VECTor|TRENd|NWAVe|NBAR|NTRend|
WBAR|WTRend|BTRend|MATH|NMATh|FFT|
NFFT|WFFT|IECHarm|CBCycle|FLICker}
:DISPlay:MODE?
NUMeric = Displays only the numeric values.
WAVE = Displays only the waveforms.
BAR = Bar graph
VECTor = Vector display
TRENd = Trend
NWAVe = Displays both the numeric values and
the waveforms.
NBAR = Displays both the numeric values and
the bar graph.
NTRend = Displays both the numeric values and
the trends.
WBAR = Displays both the waveforms and the
bar graph.
WTRend = Displays both the waveforms and the
trends.
BTRend = Displays both the bar graphs and the
trends.
MATH = Displays only the waveforms (including
the computed waveforms).
NMATh = Displays both numeric values and
waveforms (including the computed waveforms).
FFT = Displays only the FFT waveforms.
NFFT = Displays both the numeric values and the
FFT waveforms.
WFFT = Displays both the waveforms and the
FFT waveforms.
IECHarm = IEC harmonic measurement mode
display (numeric values).
CBCycle = Cycle by Cycle mode display (value).
FLICker = Flicker measurement mode display
(value).
:DISPLAY:MODE NUMERIC
Example
:DISPLAY:MODE? ->
:DISPLAY:MODE NUMERIC
Description • {BAR|VECTor|NBAR|WBAR|BTRend} are
selectable only on models with the advanced
computation function (/G6 option).
• {MATH|NMATh|FFT|NFFT|WFFT|
IECHarm} are selectable only on models
with the advanced computation function (/G6
option).
• {FLICker} can only be selected with the
flicker measurement function (/FL option).
IM WT3001E-17EN
:DISPlay:NUMeric?
Function Queries all settings related to the numeric display.
:DISPlay:NUMeric?
Syntax
:DISPLAY:NUMERIC? ->
Example
(same as the response to
":DISPlay:NUMeric:NORMal?")
:DISPlay:NUMeric:NORMal?
Function Queries all settings related to the numeric display.
:DISPlay:NUMeric:NORMal?
Syntax
Example • Example in which the numeric display format
( :DISPlay:NUMeric[:NORMal]:FORMat ) is
set to "VAL4 (4-value display)"
:DISPLAY:NUMERIC:NORMAL? ->
:DISPLAY:NUMERIC:NORMAL:
FORMAT VAL4;VAL4:ITEM1 U,1,TOTAL;
ITEM2 I,1,TOTAL;ITEM3 P,1,TOTAL;
... (omitted) ...;ITEM35 ETA3;
ITEM36 ETA4;CURSOR 1
• Example in which the numeric display format
( :DISPlay:NUMeric[:NORMal]:FORMat ) is
set to "ALL (all display)"
:DISPLAY:NUMERIC:NORMAL? ->
:DISPLAY:NUMERIC:NORMAL:
FORMAT ALL;ALL:CURSOR U
Description Returns all settings corresponding to the numeric
display format
(:DISPlay:NUMeric[:NORMal]:FORMat) .
:DISPlay:NUMeric[:NORMal]:ALL?
Function Queries all settings related to the numeric display
(all display).
:DISPlay:NUMeric[:NORMal]:ALL?
Syntax
:DISPLAY:NUMERIC:NORMAL:ALL? ->
Example
:DISPLAY:NUMERIC:NORMAL:ALL:
CURSOR U
:DISPlay:NUMeric[:NORMal]:ALL:CURSor
Function Sets the cursor position on the numeric display (all
display) or queries the current setting.
:DISPlay:NUMeric[:NORMal]:ALL:
Syntax
CURSor {<Function>}
:DISPlay:NUMeric[:NORMal]:ALL:
CURSor?
<Function> = {U|I|P|S|Q|...} (See the
function selection list (1) on page 6-44.)
:DISPLAY:NUMERIC:NORMAL:ALL:
Example
CURSOR U
:DISPLAY:NUMERIC:NORMAL:ALL:CURSOR?
-> :DISPLAY:NUMERIC:NORMAL:ALL:
CURSOR U
Description Specify the cursor position in terms of the function
name.
6.7 DISPlay Group
1
2
3
4
5
6
7
App
Index
6-35