Xerox DocuPrint 96 Message Manual page 99

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1270 Command file aborted
The @ABORT command was entered. The system has abandoned
processing of the initiated command file.
Action None.
OS1271 Cannot nest command files. Check and retry.
The command file entered is formatted incorrectly. It appears to be
contained (nested) within another command file
Action 1. Correct your command file format. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS Operations Reference chapter on
creating and using command files for additional information.)
2. Retry your command file request.
OS1272 Command file delaying
The .DELAY n command was entered. Command file processing is
being suspended for a specified period of time. (n = number of
seconds.)
Action None.
OS1273 Command file resumed
Following an interruption, command file operations have started
again.
Action None.
OS1275 Command file suspended
The .PAUSE command was entered. Command file processing is
suspended for an unspecified period of time.
or
The .WAIT command was entered. Command file processing is
suspended until the current print job is completed.
Action None.
OS1276 Command file not suspended.
This message advises you that command file operations have not
stopped being processed.
Action None.
OS1278 Command file terminated
The .EXIT command was entered. Command file processing is
ended.
Action None.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-21