Xerox DocuPrint 96 Message Manual page 58

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-20
IF2860 Invalid sections parameter
The section parameter in the GENERAL statement of the font profile
is incorrect.
Action 1. Verify and reenter the appropriate sections parameter in the
font profile.
2. Reenter the ADD command.
IF2861 Invalid substitution parameter
The requested SUBSTITUTION parameter in the PROFILE
statement of the font profile is incorrect.
Action 1. Verify and reenter the command to include the appropriate
SUBSTITUTION parameter.
2. Reenter the ADD command.
IF2862 Invalid density switch
Only 1600 and 6250 densities are valid.
Action None.
IF2863 Invalid font mask in command
The Interpress font name requested in the command is incorrect.
Action 1. Verify and reenter the command to include the appropriate
Interpress font name.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF2864 Invalid statement found in font profile
An incorrect statement exists in the font profile.
Action Verify all statements and reenter the command correctly.
IF2901 JSL syntax err x- literal exceeding y chars
A literal in the JSL file exceeds the permissible number of characters.
Action 1. Correct the JSL file to include a permissible literal.
2. Retry the command.
IF2902 JSL syntax err x - invalid hex value
An incorrect hexadecimal value exists in the JSL file.
Action 1. Correct the JSL file to include a correct hex value.
2. Retry the command.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE