Xerox DocuPrint 96 Message Manual page 310

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-40
Filter file read / open error.
One of the filter files cannot be opened.
Action If the problem persists, call Xerox Customer Service.
Filter limit reached by Extended Get/Next operation.
TBD
Action If the problem persists, call Xerox Customer Service.
Format used is incorrect for Clipboard. Change and try again.
The PC Editor uses DOS files to edit and, with different formats
available on the PC UI, the Editor files need to be in ASCII DOS. This
message is to make the user aware that the file must be converted to
ASCII DOS.
Action None.
Incompatible mode error while opening AUD File Mgr file.
TBD
Action If the problem persists, call Xerox Customer Service.
Inconsistent key flags between key segments.
TBD
Action If the problem persists, call Xerox Customer Service.
Incorrect AUD File Mgr data buffer descriptor for Extended Get/
Step operation.
TBD
Action If the problem persists, call Xerox Customer Service.
Incorrect field offset for Extended Get/Step operation.
TBD
Action If the problem persists, call Xerox Customer Service.
Initializing Client-Layer protocol
The system controller has established low-level communication with
the printer, and is now trying to establish high-level message
communication with the printer.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE