Xerox DocuPrint 96 Message Manual page 138

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-60
Action Retry the operation, using one of these two file-types.
OS2613 Ink parameter required on sample command
You have entered a command which is missing an ink-name or a file
containing an ink-name. In other words, the INK[S] keyword is
missing parameters.
Action Re-enter the command, using the needed parameters.
OS2614 File not found
The ink-name file specified in message "OS7190 PROBLEM WITH
FILE file-name.file-type" cannot be opened.
Action Verify the file-name and file-type you have specified and retry the
command.
OS2615 File I/O error
The system cannot recognize the ink-name file specified in the
message "OS7190 PROBLEM WITH FILE file-name.file-type."
Action Verify the file-name and file-type and retry the command.
OS2650 Status file nearly full. Execute status file save procedure. Enter
SFS clear after file save.
Very little space remains in the status file memory. When new data is
stored, the oldest report data could be lost.
Action 1. Write the current status file to magnetic tape. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on tracking system activity for additional information.)
2. Enter the SFS CLEAR command, then the SFS CREATE
command to create a new Status File.
OS2660 Do you want to enter Accounting? [Y or N]
or
Do you want to enter Accounting? Type Y for 2000
reports or N for 100 reports.
(This message appears at the end of the sysgen process.) To set the
size of the status file:
Action Enter Y to create an accounting file for 2000 reports.
or
Enter N to create an accounting file for 100 reports. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS System Generation Guide .)
0S2669 Enter 'PQA Start' to initiate a Print Quality Adjustment.
Print Quality Adjustment (PQA) is not pending. Therefore, enter the
PQA START command to start the PQA process.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE