Xerox DocuPrint 96 Message Manual page 289

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
9060 No data file on re-open error
Intermediate DDB (Dialog Data Base) data file not found. The
missing file may represent the results of one or more previous steps
in the process of the program (MM, CD or TDB).
Action Contact Xerox Customer Service to determine recovery point.
9061 Index file error code
Intermediate DDB (Dialog Data Base) index file could not be opened.
Possible DOS error. Possible faulty disk hardware.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9065 DDB file open error
A DDB (Dialog Data Base) file could not be opened by DOS.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9066 Cannot return file status
Calling program cannot read or update file control table status data.
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9067 File is empty; has no data
The file opened as a Dialog DDB (Dialog Data Base) file is
completely empty. The empty file may represent the results of one or
more previous steps in the process of the program (MM, CD or TDB).
Action Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service to determine recovery
point.
9068 DDB file write - disk full
CD, MM or TDB has filled the disk device during the creation of files.
Action 1. Use File Management windows to remove unnecessary files.
Try to obtain 1Mb to 2Mb (Megabytes) of free disk space.
2. If problem persists, contact Xerox Customer Service.
Messages 9537 through 9542
The following messages (9537 through 9542) are the results of
problems/warnings/status that could occur when the graphics display
and action processing refer to object and data variable information.
15-19