Xerox DocuPrint 96 Message Manual page 229

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
**File type in output name must be xxxx
The file type in the output name must be from an acceptable font
directory.
Action Reenter the output name using a font from the specified directory.
Acceptable file types are FNT, FN6, FR6, LG0, and LG6. (Refer to
your DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on managing LPS resources for additional information.)
**File, xxxx, can not be scaled (unknown error)**
The requested file cannot be scaled due to an unknown error.
Action Contact your systems specialist or Xerox Customer Support.
**Font file xxxx cannot be scaled (byte escapement)**
The requested font file cannot be scaled due to a problem with byte
escapement.
Action 1. If you are not using an Interpress font, add switch "A" (assign
escapement) to the SCALE command line. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS OSS Program Description, -
11.)
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
**Font file, xxxx, cannot be scaled (extended metrics)**
The requested font file cannot be scaled due to a problem with
extended metrics.
Action 1. Use the IFU ADD command to get the correct point size. (Refer
to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference chapter on HIP-accessed communicating modes for
additional information.)
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
**Font file, xxxx, cannot be scaled (graphic font)**
The requested font file cannot be scaled because the resulting file
would not be compatible with the original.
Action None
**Font index in TL does not match font list.
The font index in the text line does not match the font list. The FRM
file is probably corrupted or created incorrectly.
Action 1. Recreate the FRM file using FDL and retry the SCALE
command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
SCALE COMMAND MESSAGES
11-3