Xerox DocuPrint 96 Message Manual page 66

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-28
IF7705 Family name directory will not open
The FDR package is either not on the system or is corrupted
Action Execute the IFU IPFNTS command sequence to recreate the FDR
file
IF7800 Interpress decomposer initialization error
There is insufficient memory to initialize IPD.
Action Contact your systems specialist or Xerox Customer Service.
IF7801 Interpress mapping file package ADD function failed
An error occurred when adding an entry to the IPM (Interpress.
mapping), probably due to a disk error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7802 Interpress mapping package failure
An error occurred when accessing the IPM file, probably due to a disk
error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7803 Character mapping table package error
An error occurred when the system was processing the character
mapping table package, probably due to a disk error or insufficient
space.
Action Contact your systems specialist or Xerox Customer Service.
IF7804 Character mapping table package will not open
The system is unable to access the character mapping table
package, probably due to a disk error or insufficient space.
Action Contact your systems specialist or Xerox Customer Service.
IF7901 CMT failed during IPF call x
CMT (character mapping table) could not be read from the
IPFNTS.SYS file. Either IPFNTS does not exist on the system or the
file is corrupted.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, the file is corrupted.
Recompile the IPFNTS.JSL to replace the corrupted
IPFNTS.SYS file.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE