Xerox DocuPrint 96 Message Manual page 298

DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-28
BTEXT date parameter exceeds 365 days.
The number of days specified in the BTEXT LDT parameter is too
large.
Action Check JSL or DJDE in job stream to ensure that all BTEXT LDT
keywords and parameters are correct.
BTEXT signal unrecognized; not PAG or RPT
A BTEXT keyword or parameter is invalid.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct. This error occurs when data in the DJDE
BTEXT is completely unrecognizable
BTEXT signal Page Detail text invalid
BTEXT Page Detail text is incorrect.
Action Check JSL or DJDE in job stream to ensure that all Page Detail
BTEXT keywords and parameters are correct. Parameters to check
are SEQ, PRA, and TXT. If the problem persist, call Xerox Customer
Service
BTEXT signal text invalid
A BTEXT keyword or parameter is invalid.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct.
BTEXT signal text invalid response
A BTEXT keyword parameter contains invalid data, for example an
incorrectly specified date.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct.
BTEXT signal text truncated
A BTEXT signal has exceeded the maximum buffer size allowed,
resulting in truncation of the excess data. This may be caused by
keyword parameters that exceed the published maximum sizes.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct.
Cannot access memory for record position pointer.
Attempting direct read of file but list of records does not exist.
Action If the problem persists, call Xerox Customer Service.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE