PG (PURGE COMMAND) MESSAGES
8-2
PG0217
Purging HIP Spool File.
The PURGE command is removing unwanted data from the HIP
spool file.
Action
None
PG0300
Processing the entire disk except the Print File.
The PURGE F command was entered. The system is clearing all
unused areas of the disk except the print file.
Action
None
PG0310
Purging the following disks (excluding print files):
The listed system disk drives will be cleared except for any applicable
print files.
Action
None
PG1010
Purge processor active.
A PURGE command was entered while purge was already in
progress. The command is ignored.
Action
None
PG1800
Purge processor aborting
The ABORT command was entered. The purge process is being
terminated.
Action
None
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE