Xerox DocuPrint 96 Message Manual page 157

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS3400 Printer jam... see printer message.
A paper jam has occurred at the area indicated on the printer control
console display.
The printer control console displays one of the following:
CHECK FOR PAPER IN AREA 6. LIFT SAMPLE TRAY.
CLEAR JAM IN AREA 1. SEE INSTRUCTIONS INSIDE MIDDLE
DOOR.
CLEAR JAM IN AREA 2. SEE INSTRUCTIONS AT AREA 2.
CLEAR JAM IN AREA 3. SEE INSTRUCTIONS AT AREA 3.
CLEAR JAM IN AREA 4. SEE INSTRUCTIONS AT AREA 4.
CLEAR JAM IN AREA 5. SEE INSTRUCTIONS AT AREA 5.
CLEAR JAM IN AREA 5, THEN IN AREA 4. SEE INSTRUCTIONS
AT AREAS 5 AND 4.
CLEAR JAM IN AREA 6. LIFT SAMPLE TRAY.
CLEAR JAM IN AREA 7. SEE INSTRUCTIONS AT AREA 7.
CLEAR JAM IN AREA 8. SEE INSTRUCTIONS AT AREA 8.
CLEAR JAM IN AREA 9. SEE INSTRUCTIONS AT AREA 9.
CLEAR JAM IN AREAS 1 AND 2. SEE INSTRUCTIONS INSIDE
MIDDLE DOOR.
CLEAR JAM IN AREAS 2 AND 3. SEE INSIDE MIDDLE DOOR AND
AREA 3 FOR INSTRUCTIONS.
CLEAR JAM IN PAPER TRAY 1. SEE INSTRUCTIONS ON PAPER
TRAY. PRESS i.
CLEAR JAM IN PAPER TRAY 2. SEE INSTRUCTIONS ON PAPER
TRAY. PRESS i.
PAPER PATH FAULT. CHECK FOR PAPER IN AREAS 1, 2, 3, 4,
AND 5
TO PREVENT JAMS, BE SURE LENGTH GUIDE IN TRAY IS
POSITIONED AGAINST PAPER.
Action Remove jammed sheet(s) from area(s) indicated on the printer
control console display (Refer to the problem solving chapter in your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
OS3700 Suspected page-delivery error. Check output.
The last printed sheet may not have reached the stacker tray.
Action Check the stacker trays, removing any sheet jammed while entering
the tray.
OS3705 Suspected set delivery error.
There is an apparent set delivery problem.
Action Visually inspect the sets.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-79