Xerox DocuPrint 96 Message Manual page 70

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-32
IF8103 CMT symbol table has overflowed by map x
There was not enough space in the character mapping table when
adding the next symbol.
Action Contact your systems specialist or Xerox Customer Service.
IF8104 CMT entry table has overflowed by map x
There was not enough space in the character mapping table when
adding the next entry.
Action Contact your systems specialist or Xerox Customer Service.
IF8105 CMT insufficient room in disk file (MAP x )
There is insufficient disk space for the requested character mapping
table.
Action Contact your systems specialist or Xerox Customer Service.
IF8106 CMT mapping x too big
The size of the indicated mapping exceeds the maximum size.
Action Contact your systems specialist or Xerox Customer Service.
IF8201 Error: from IPM_open ( )
The system is unable to open an IPM file.
Action 1. Delete all IPM files from the system.
2. Recompile IPFNTS.JSL to recreate the IPM files and retry the
command.
3. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF8202 Error: from FFM_open ( )
The system is unable to open the IFUFFM.SYS file (font file
management). Either the IFUFFM.SYS file is not on the system or it
is corrupted.
Action 1. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
2. Retry the ADD command.
3. If the problem continues, contact your systems specialist or
Xerox Customer Support.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE