Xerox DocuPrint 96 Message Manual page 64

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-26
IF7000
** - WRITE LOCK PROTECTION ERROR - **
A write operation could not be completed successfully, probably
because the write ring is not present on the magnetic tape.
Action
1. Put a write enable ring on the magnetic tape. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
2. Retry the command.
IF7100
Can't find IFUFSN.SYS; resysgen and retry ADD
The IFUFSN.SYS file, which contains default font information, was
not found on the system disk. (Refer to your DocuPrint 96/
DocuPrint 96MX LPS System Generation Guide .)
Action
1. If authorized to do so, resysgen.
2. Retry the ADD command.
IF7101
Font file x will not open
The requested font file is not on the system.
Action
Copy the missing font onto the system.
IF7102
IPFNTS.SYS file will not open
The IPFNTS.SYS file is not on the system.
Action
Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
command.
IF7104
IPFNTS.SYS open error
The system is unable to access the IPFNTS.SYS file.
Action
Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
command.
IF7105
Output file will not open
The medium specified (tape, disk, etc.) does not contain the external
file requested
Action
Verify the file name and, if it exists on the medium, reenter the
command. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
Operations Reference chapter on managing LPS resources for
additional information.)
IF7106
Print file will not open
The IFU LIST command cannot open the .DAT print file to process.
This is probably a disk error.
Action
1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents