Xerox DocuPrint 96 Message Manual page 169

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS6195 Page interleaved graphic xxxxxx read but not referenced.
A graphic interleaved with text is being input but is not referenced by
a DJDE. The graphic will not be printed.
Action 1. Recode DJDE, referencing the indicated graphic. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference .)
2. Restart the job.
OS6196 Copy sensitive form xxxxxx uses graphics.
A form to be used on selected copies and referencing graphics has
been specified. The system cannot print copy-sensitive forms with
graphics.
Action Recreate the job, specifying a different form that does not reference
graphics or that is not copy-sensitive.
OS6200 Label and File Block count mismatch. Continue or Abort?
The block count on the tape label differs from JDE. Data loss may
have occurred in the file just processed.
Action 1. Press the <CON> key to resume printing if data loss is
acceptable.
or
Enter the ABORT job command to cancel the job.
2. Recode JDE to match the tape label block count. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on setting LPS parameters for additional information.)
3. Restart the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-91