Xerox DocuPrint 96 Message Manual page 179

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS6733 File x overflow—excess card image data lost.
The file indicated contains more card-images than specified in DJDE.
The extra card-images will not be copied to disk.
Action 1. Recode DJDE, specifying the correct number of card-images.
(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference chapter on LPS processing for additional
information.)
2. Resend the job.
OS6734 File processing error—invalid destination file name.
The file being sent from the host has a file name improperly specified
(too many characters, etc.) in DJDE. The file will be printed and not
copied to disk.
Action 1. Recode DJDE, including the correct file name. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS Operations Reference
chapter on LPS processing for additional information.)
2. Resend the job.
OS6735 File processing error—illegal destination file type.
The file specified in DJDE contains a 3-character file type extension
not in the LPS disk directory; or file has one of the following
extensions: .OSD, .SAF, .SYS, .$Y$, or .TSK. The file will not be
copied to disk.
Action Recode DJDE, specifying only files with acceptable file type
extensions. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
Operations Reference chapter on LPS processing for additional
information.)
OS6736 File processing error—no label record.
The first label record of the file being sent was not recognized by the
system-either the file type extension was not a file type existing on
the disk, the file name was improperly constructed, or the block size
parameter was not 512 bytes. The file will be printed and not copied
to disk.
Action 1. Recreate the tape, making necessary corrections to the label.
(Refer to your DocuPrint 96/DocuPrint 96MX LPS Operations
Reference chapter on LPS processing for additional
information.)
2. Resend the job.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-101