Xerox DocuPrint 96 Message Manual page 74

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-36
IF8218 Error: from FFM_Delete ( )
An error occurred when the system attempted to access the
IFUFFM.SYS file. Either the file is not on the system or is corrupted,
or there is a software problem.
Action 1. Check if the IFUFFM.SYS file is on the system.
2. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the ADD command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF8301 IPM calling sequence error x
The IPM file is being processed out of sequence.
Action Contact your systems specialist or Xerox Customer Service.
IF8302 IPM disk family x is too big
In an IFU IPFNTS command, this IPM name is too large to be added
to the IPM file on the system.
Action 1. Alter the JSL file if necessary, to specify a smaller IPM family to
be compiled.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8303 IPM family is too large: x
In an IFU IPFNTS command, this IPM name is too large to be added
to the IPM file on the system.
Action 1. Alter the JSL file if necessary, to specify a smaller IPM family to
be compiled.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8304 IPM storage request has failed
The amount of storage space requested is too large.
Action Contact your systems specialist or Xerox Customer Service.
IF8307 Interpress decomposer easy value error
There has been an error when reading easy values from the input
media.
Action Contact your systems specialist or Xerox Customer Service.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE