Xerox DocuPrint 96 Message Manual page 107

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1421 Page spacing not allowed for N-1 report
Page spacing is not allowed when printing N-1.
Action None.
OS1430 Block spacing not allowed by JDE
The SPACE n BLOCKS command was entered. JDE specified
ABNORMAL SECURITY = YES. The system cannot space over
blocks of text.
Action 1. Allow all data to print.
or
Enter the ABORT job command to cancel the job.
2. Recode JDE, eliminating ABNORMAL SECURITY = YES.
OS1450 Cannot space reports before Start command
The SPACE n REPORTS command was entered. The system
cannot space over reports because START command was not
entered.
Action 1. Enter the START command.
2. Reenter the SPACE command.
OS1460 Cannot space if "Reports:" is specified with Start CMD
The SPACE n REPORTS command was entered. The system
cannot process the command because the REPORTS option of the
START command was entered when the job was started.
Action 1. Allow all data to print.
or
Enter ABORT job to cancel the job.
2. Restart the job without the REPORTS option in the START
command.
OS1500 Page spacing stopped by Beginning-of-Report
The SPACE -n PAGES command was entered, but the system will
not space backward any more because it sensed a magnetic tape
label indicating the beginning of a report.
Action None.
OS1509 Page spacing already in progress
The SPACE n PAGES command was entered, but the system had
not completed a previously entered spacing command.
Action None.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-29