Os Level 3: Printer Problem - Xerox DocuPrint 96 Message Manual

Laser printing system
Hide thumbs Also See for DocuPrint 96:
Table of Contents

Advertisement

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS Level 3: Printer problem

6-72
Indicates specific DocuPrint 96/DocuPrint 96MX LPS problems and
explains what action(s) to take.
OS3001
Check printer doors and top covers
A door or cover on the printer is not closed correctly. The printer
control console message display indicates which door/cover is open.
The printer control console displays one of the following:
CLOSE LEFT DOOR
CLOSE MIDDLE DOOR
CLOSE RIGHT COVER
CLOSE RIGHT DOOR
CLOSE SAMPLE TRAY
Action
Firmly close the door or cover indicated in the message display.
OS3002
Paper Tray 1 fault--see message at printer
Feed tray 1 has not risen completely.
The printer control console displays one of the following:
IF FAULT continues, SWITCH JOB TO PAPER TRAY 2 AT CRT
PAPER TRAY FAULT. OPEN MIDDLE DOOR, OPEN AND CLOSE
PAPER TRAY. PRESS i.
Action
1. Press the i button on the printer control console for further
console messages if the printer control console display instructs
you to do so.
2. Pull out feed tray 1, then push it all the way back in.
3. If the tray does not rise, enter the FEED 2 command to switch
to another tray to complete the job.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
Note: CRT refers to the DocuPrint 96/DocuPrint 96MX LPS system
controller display.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 96mx

Table of Contents