Xerox DocuPrint 96 Message Manual page 57

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
IF2852 Invalid FTYPE parameter
The FTYPE parameter in the font profile is incorrect.
Action 1. Reenter the FTYPE parameter to include the correct parameter
(either STANDARD or EXTENDED).
2. Retry the ADD command.
IF2853 Invalid Interpress family name
The Interpress family name requested is incorrect.
Action Reenter the command to include the family name statement with the
correct syntax.
IF2854 Invalid mapping parameter on fonts statement
The mapping parameter contained in the FONTS statement of the
IPFNTS command sequence is not allowed.
Action 1. Reenter the command to include an acceptable mapping
parameter in the FONTS statement.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF2856 Invalid name parameter on fonts statement
The NAME parameter in the JSL file is incorrect.
Action Enter the correct NAME parameter in the JSL file.
IF2857 Invalid printer name in the IPFONTS statement
The printer name entered in the CREATOR statement in the font
profile is incorrect.
Action 1. Correct the CREATOR statement in the font profile with an
appropriate printer name.
2. Retry the command.
IF2858 Invalid printer name
The printer name entered in the printer command is incorrect.
Action Check and reenter the appropriate printer name in the command.
IF2859 Invalid resolution parameter on fonts statement
The resolution requested (300 or 600 spi) in the fonts statement in
the JSL file is incorrect for your system's configuration.
Action 1. Correct the resolution parameter in the FONTS statement in the
JSL file.
2. Retry the command.
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-19