Xerox DocuPrint 96 Message Manual page 91

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1017 Physical device %0 substituted for logical device %1.
The device substitution specified in the SUB DEV command has
taken place.
Action None.
OS1020 Job xxxx has completed input phase
All requested manipulation of data is complete and final imaged
pages are in the print file.
Action None.
OS1030 Job xxxx has completed printing
The system has finished printing the indicated job.
Action None.
OS1031 Diagnostic print job completed
This message indicates completion of a diagnostic print job.
Action None.
OS1050 Rewind will be done at End-of-Job
When the job has completed processing, the tape will automatically
rewind.
Action None.
OS1061 Initializing CSI
The printer interface board is being initialized to prepare for
operation.
Action None.
OS1062 System mailbox initialized
This is a status message which appears whenever the system is
booted, advising you that the system mailbox feature is being
processed.
Action None.
OS1070 Bar status changing to ON (End Of Report or Task Exit)
The command Bar Off n was entered disabling the barcode reader
for a specified number of sheets but the report ended prior to
reaching n count resulting in the barcode reader being enabled.
Action None.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-13