Xerox DocuPrint 96 Message Manual page 297

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
Audit Log formatting - no files selected.
The criteria selected in the audit log print options or audit log job
options window are not met. This applies to the 'Jobs' option only.
Action Select different criteria and retry the operation.
Audit Log reconciliation error.
The stated monetary amount of the report does not match the sum of
the sheets delivered.
Action Abort or continue the job.
Audit Log save complete.
A request to save an audit log has completed.
Action None.
Audit Log sequence error.
A sequence error has been detected on the last sheet delivered.
Action Abort or continue the job.
Audit Log stale date fault.
An unexpired audit log exists on the audit log database for this
printer.
Action Abort or continue the job.
Audit Logging state notification.
The auditor has changed state by either entering or leaving the active
auditing state.
Action None.
Audit report format already in progress.
The audit report formatter is already processing a request.
Action If the problem occurs when no audit logs are being displayed or
printed call Xerox Customer Service.
Bad block on tape device.
The tape drive is unable to read a specific block of data from the tape.
This could be caused by damaged media or a dirty or defective tape
drive.
Action 1. Clean the tape drive.
2. Replace the tape.
If the problem occurs when no audit logs are being displayed or
printed call Xerox Customer Service.
15-27