DOCUPRINT 96/DOCUPRINT 96MX LPS ADDITIONAL MESSAGES
15-50
Number of accelerated files exceeds number of available AUD
File Mgr buffers.
Action
If the problem persists, call Xerox Customer Service.
PAG BTEXT signal received before RPT BTEXT signal.
A Page Detail BTEXT signal has been received before a Report
Definition BTEXT signal. This page will not be logged.
Action
Check JSL or DJDE in the job stream to ensure that Report Definition
BTEXT precedes Page Detail BTEXT.
Printer Client-Layer is not responding.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Action
None.
Printer failed to send configuration.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Action
None.
Printer is not answering the Controller's state request.
Informational message. The system controller is trying
unsuccessfully to establish high-level communication with the
printer.
Action
None.
Printer is ready.
Informational message. The DocuPrint 96/DocuPrint 96MX LPS is
communicating normally and is ready to print. There are no existing
faults or hints.
Action
None.
Printer is reinitializing.
Informational message.
Action
None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE