Xerox DocuPrint 96 Message Manual page 160

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-82
OS4150 Input drive is offline. 'CONTINUE I' when it is ready.
The START or MOVE command was entered while the tape drive
was not online to the printer.
Action 1. Press the On Line button on the tape drive.
2. Enter the CONTINUE I command to resume input.
OS4200 Input drive not responding, do one of the following: *Verify drive
is online, 'CONTINUE I' when ready* call for service
Software is issuing input/output commands, but the tape drive is not
responding with status information.
Action 1. Press the On Line button if the tape drive is offline to the printer.
2. Enter the CONTINUE I command.
3. If the message is still displayed, contact your systems specialist
or Xerox Customer Service.
OS4201 Unable to complete operation. Check drive.
A hardware problem exists with the tape drive. The system is unable
to complete the operation in progress.
Action Contact your systems specialist or the Xerox Customer Service.
OS4310 Irrecoverable tape read error during tape dump.
The START n, DUMP command was entered, but software is unable
to read tape.
Action 1. Clean the magnetic tape drive. (Refer to the maintenance
chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
2. Reenter the command.
3. If the message reappears, contact your systems specialist or
Xerox Customer Service.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE