Xerox DocuPrint 96 Message Manual page 144

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-66
OS2740 JDE not found. Check and retry.
The JDE entered in the START command does not exist on the
system disk.
Action Reenter the START command with the correct JDE. (Refer to the
online chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
OS2741 JDL not found. Check and retry.
The JDL entered in the START command does not exist on the
system disk.
Action Reenter the START command with the correct JDL. (Refer to the
online chapter in your DocuPrint 96/DocuPrint 96MX LPS Operator
Guide .)
OS2745 Enter password for document.
"DocumentPassword" The correct password must be entered before
the job can be continued.
Action Key in the correct password.
OS2750 Job not found. Check and retry.
The job id number entered in the START command was not sent.
Action 1. Verify that the job number was entered correctly.
2. Reenter the START command.
3. If the message reappears, resend the job.
OS2760 Sample file not found. Check and reenter.
The SAMPLE command was entered, but the file name requested for
sampling is not in the system.
Action 1. Verify the file name and reenter the SAMPLE command
correctly.
2. If the message reappears, load the desired file to the system
disk. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
Operations Reference chapter on managing LPS resources for
additional information.)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE