Xerox DocuPrint 96 Message Manual page 238

SFS (STATUS FILE SERVICES COMMAND) MESSAGES
12-4
SF6050 A - cannot open file. Abort
The command file needed for the user-created form cannot be
accessed due to system disk error. ("A -" indicates SFS is aborting.)
Action 1. Retry compiling the form. The message should not reappear if
the failure was an intermittent memory error.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
SF6051 A - cannot do I/O to file. Abort
A problem exists with user-created form output due to system disk
error. SFS is aborting.
Action 1. Retry compiling the form. The message should not reappear if
the failure was an intermittent memory error.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
SF6060 W - value for 'MAX' exceeds limit.
The MAX statement specifies a number greater than 4 for lines in the
header. The system will use the default value of "1." ("W-" signifies
"warning"—the system will modify the entry and compile the form.)
Action If desired, recompile the form, using a value of 1-4 for MAX.
SF6061 W - text truncated.
Input text is too long to fit into the column width specified in the
WIDTH statement. The system will enter only as many characters as
will fit, ignoring the rest, and compile the form.
Action If desired, recompile the form, reducing the size of the text entry.
SF6062 W - default value assumed for 'Length'
No LENGTH statement was entered for the user-created form. The
system will use either WIDTH value or the actual length of the content
of the column, whichever is smaller, and compile the form.
Action None.
SF6063 W - length of content truncated.
The column width value specified in the WIDTH statement for the
user-created form is smaller than the actual content of the column.
The system will enter only as many characters as will fit, ignoring the
rest, and compile the form.
Action None.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE