Xerox DocuPrint 96 Message Manual page 165

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS6010 Tape "LABEL ERROR" messages
OS6010 Label error: Invalid label format; Continue or Abort?
OS6011 Label error: Vol 1; Continue or Abort?
OS6012 Label error: HDR 1; Continue or Abort?
OS6013 Label error: UHL, TM, or HDR2; Continue or Abort?
OS6014 Label error: EOF or EOV; Continue or Abort?
OS6015 Label error: TM, HDR, or UHL; Continue or Abort?
OS6016 Label error: TM or USER; Continue or Abort?
OS6017 Label error: Tape mark; Continue or Abort?
OS6018 Label error: EOF; Continue or Abort?
OS6019 Label error: EOV; Continue or Abort?
OS6020 Label error: UVL or HDR 1; Continue or Abort?
OS6021 Label error: UTL, TM, or EOF; Continue or Abort?
OS6022 Label error: ANSI option 3; Continue or Abort?
OS6023 Label error: 1HDR; Continue or Abort?
OS6024 Label error: 1EOR, TM, or 1EOF; Cont or Abort?
OS6025 Label error: 1EOR or 1EOF; Continue or Abort?
OS6026 Label error: 1EOR; Continue or Abort?
OS6027 Label error: 1EOF; Continue or Abort?
OS6028 Label error: 1ERI, TM, or 1HDR; Cont or Abort?
OS6029 Label error: Basic tape; Continue or Abort?
OS6030 Label error: EOF or EOR; Continue or Abort?
OS6031 Label error: EOR; Continue or Abort?
OS6032 Label error: HDR 1, UVL, or VOL; Cont or Abort?
OS6033 Label error: HDR 1 or UVL; Continue or Abort?
OS6034 Label error: TM, EOF 2, or UTL; Continue or Abort?
OS6035 Label error: TM or Trailer; Continue or Abort?
OS6036 Label error: TM or HDR 1; Continue or Abort?
OS6037 Label error: Standard HDR; Cont or Abort?
OS6038 Label error: Standard EOF or EOV; Cont or Abort?
OS6039 Label error: Standard EOF; Continue or Abort?
OS6040 Label error: Standard EOV; Continue or Abort?
OS6041 Label error: Special Block LBL; Cont or Abort?
OS6042 Label error: Illegal power V/S Format; Continue or Abort?
In attempting to read a tape label, the system has not encountered
the label part indicated in the message. (Refer to the glossary for
explanation of abbreviations.)
Action 1. Enter the ABORT job command to cancel the job and clean the
magnetic tape drive to ensure that the read process was not
impaired. (Refer to the maintenance chapter in your DocuPrint
96/DocuPrint 96MX LPS Operator Guide .)
2. Restart the job. If the message reappears, do one of the
following:
a. Press the <CON> key to resume processing. If other "label error"
messages or message OS6500 appear, continue pressing the
<CON> key until the job prints.
or
Enter the ABORT "job" command to cancel the job.
b. Check JSL, making any changes necessary. (Refer to your
DocuPrint 96/DocuPrint 96MX LPS PDL Reference or DocuPrint
96/DocuPrint 96MX LPS Operations Reference chapter on
setting LPS parameters for additional information.)
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-87