Xerox DocuPrint 96 Message Manual page 68

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-30
IF7909 SAMPLE command failed, retry
The command file IFSAM$.CMD, used to print out the fonts specified
in the SAMPLE command, does not exist because the FOPEN
command failed. This is a probable disk error.
Action Contact your systems specialist or Xerox Customer Service.
IF7910 IPM FDR routine x has failed
An error occurred while accessing the file directory (FDR), probably
due to a disk error.
Action 1. Check if the IFUFDR.SYS file is on the system.
2. If IFUFDR.SYS is on the system, the file is corrupted and
should be deleted.
3. Recompile IPFNTS.SYS to recreate this file.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7911 IPM error
IPM would not open because it is either not on the system or the file
is corrupted.
Action 1. Delete the IPM files on the system.
2. Recompile IPFNTS.SYS to recreate this file.
3. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF7912 IPM FCLOSE of file x has failed
An attempt is being made to close an IPM file that is already closed
or an IPM file that is corrupted, probably due to a disk error.
Action 1. Delete the IPM files on the system.
2. Recompile IPFNTS.SYS to recreate this file.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7913 IPM FOPEN of file x has failed
An attempt is being made to open an IPM file that is already open.
Action 1. Delete the IPM files on the system.
2. Recompile IPFNTS.SYS to recreate this file.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE