Xerox DocuPrint 96 Message Manual page 192

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-114
OS7950 Unable to open print file... Enter "RESET" then REA.
The print file on the system disk was left in such state that it cannot
be opened. The job will not print.
Action 1. Enter the RESET command.
2. Enter the REALLOCATE command and follow directions on the
display. (Refer to your DocuPrint 96/DocuPrint 96MX LPS
Operations Reference chapter on setting LPS parameters for
additional information.)
3. Restart the job.
OS7970 Feed stock not in stockset.
The JDE/JDL FEED option calls out a stock that is not in the current
stockset.
Action None.
OS7971 Feed stock specified, but no stockset in effect.
A feed stock has been specified that is not contained in the current
stockset.
Action Restate your cluster command to include that feed stock. (Refer to
the chapter on feeder trays in your DocuPrint 96/DocuPrint 96MX
LPS Operator Guide .
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE