Stopping A Measurement Procedure; Assigning Anonymous Measurement Procedure To A Seca Patient File - Seca mVSA 535 Instructions For Use Manual

Stopping a measurement procedure

Assigning anonymous
measurement procedure to a seca
patient file
60 •
seca mVSA 535
► Stop the current measurement procedure before you start a new one.
You have the following options:
► Press the
► Assign anonymous measurement to a seca patient file: ➔
anonymous measurement procedure to a seca patient file
► Press the
To assign an anonymous measurement procedure to a patient file, proceed
as follows:
1. Log in ➔
Logging in.
2. Press the Patient tab.
You have the following options for continuing
• ➔
Calling up a seca patient file
• ➔
Creating a seca patient file
3. Confirm the Assign measurement? message.
The measurement procedure is assigned to the patient file.
4. Press the button.
The measurement procedure is saved.
button: Save measurement procedure
button: Discard measurement procedure
Assigning