Preparation For Measurement - Seca 985 Instruction Manual And Guarantee

Preparation for measurement

The equipment trolley allows the bed scale to be used on a mobile basis, but the scale
can also be permanently installed.
– Move the equipment trolley next to the
bed.
– Press the brakes down onto the cas-
tors to lock the trolley in position.
– Remove one measuring foot and place
it next to one of the bed castors. Fold
out the actuating lever.
To unlock the lever, press down the
round knob.
– Keep the actuating lever at an angle of
approx. 45° to the floor and push the
measuring foot up against the bed.
The oscillating arm should now be next
to the bed castor.
– Now push the measuring foot further
forward – holding the oscillating arm
firmly in the other hand.
The oscillating arm is now under the
bed castor.
– Press the actuating lever downwards.
The measuring foot moves under the
castor, lifting the bed.
The floor under the measuring foot should
be level. You must make sure that the con-
necting cable is not caught under the
measuring foot, otherwise faulty measure-
ments may result.
24