Device Components; Power Supply; Vital Signs Measurement; Alarms - Seca mVSA 535 Instructions For Use Manual

Device components

Power supply

Vital signs measurement

Alarms

Weight and height

User IDs of EMR systems

seca patient files

Patient data from EMR systems

Measured results

The consists of a monitor and a SmartBucket.
seca mVSA 535
The monitor is for managing patient and user data and for preparing and ana-
lyzing measurements. The monitor is equipped with a touchscreen display.
The SmartBucket includes the measuring equipment for recording vital signs
and storage facilities for the measuring accessories.
In the maximal configuration, the vital signs blood pressure, body tempera-
ture, pulse rate and oxygen saturation can be recorded. Your version of the
device may have a more limited functional scope.
The monitor is powered by a connection to the power supply. The monitor
has a lithium-ion rechargeable battery to provide a mobile power supply.
The SmartBucket is supplied with power via a USB connection from the
monitor.
Blood pressure is measured non-invasively with seca measuring equipment
and seca blood pressure cuffs.
Temperature is measured with COVIDIEN
depending on the device version, as an oral/axillary (blue temperature probe)
or rectal (red temperature probe) procedure.
Oxygen saturation is measured with Masimo SET
ing SpO sensors and patient cables.
2
Depending on device version, pulse rate is determined using either oxygen
saturation or blood pressure.
Alternatively, a patient's vital signs can be entered manually.
The device is intended for discontinuous measurement of vital signs, so it
does not have an alarm function.
Scales and measuring rods with an internal interface module or a
external interface module can transmit measured results to the device via
LAN or WiFi.
Alternatively, the patient's weight and height can be recorded manually.
If the device is connected to an EMR system via the
ware, the user IDs of the EMR system can be used for measurements. Local
user accounts on the device are required for administration and service tasks.
seca patient files and seca patient databases contain exclusively data neces-
sary for working with seca products or which were determined using seca
products.
In stand-alone mode, measured results are managed in seca patient files.
seca patient files can be set up, edited, exported and deleted directly on the
device.
Depending on the EMR system in question, patient data from EMR systems
can be used by means of a connection to the
Measured results for the vital signs blood pressure (NIBP), temperature
(TEMP), pulse rate (PR) and oxygen saturation (SpO
graphical form.
measuring equipment and,
TM
and with the correspond-
®
seca 452
seca connect 103
software.
seca connect 103
) are displayed in
2
Description of device • 7
English
soft-