Data Transmission And Network Functions; Compatibility; User Qualification; Administration/Network Connection - Seca mVSA 535 Instructions For Use Manual

Hide thumbs Also See for mVSA 535:
Table of Contents

Advertisement

Data transmission and network
functions

Compatibility

2.4 User qualification

Administration/network connection

Measuring mode

2.5 Contraindications

8 •
seca mVSA 535
The device can be integrated into a network via a LAN interface or via WiFi in
order to use the following functions:
• Connection of the device to the
an option: Using the user and patient data of an EMR system and
submitting measured results to the EMR system
seca 360° proximity
scales and measuring rods with an internal interface module or a
external interface module
seca 452
Measured results for the parameters blood pressure, body temperature,
pulse rate and oxygen saturation are transmitted from the SmartBucket to the
monitor via a USB connection.
software
seca connect 103
This device (software version 2.0, Build 1444 or higher) is only compatible
with version 3.1 or higher of the
downward compatibility with older versions of the
Internal interface module/
This device (software version 2.0, Build 1444 or higher) is only compatible
with interface modules on which firmware version R1.3 Build 79 or higher is
installed.
Administration/network connection
Measuring mode
The device may only be set up and incorporated in a network by experienced
administrators or hospital technicians.
The device may only be used by persons with sufficient expertise.
Basic knowledge required for measuring vital parameters is not the subject of
these instructions for use.
Connecting the device to an EMR system affects the measuring sequence
and operation of the device: ➔
tem. People operating the device must be informed about these effects.
This device is not suitable for persons with the following characteristics:
• Cramps
• Tremors
seca connect 103
connection: Receiving weight and height from
software. There is no
seca connect 103
seca connect 103
interface module
seca 452
Operation when connected to an EMR sys-
software available as
software.

Advertisement

Table of Contents
loading

Table of Contents