Operation; Switching The System On/Off; Switching On; Logging In - Seca mVSA 535 Instructions For Use Manual

6. OPERATION

6.1 Switching the system on/off

Switching on

Logging in

➔
Switching the system on/off
➔
Managing seca patient files
➔
Measuring vital signs
➔
Adding weight and height
➔
Entering vital signs manually
➔
Analyzing measurement
➔
Switching on
➔
Logging in
➔
Logging out/switching user
➔
Saving power/switching off
1. Press the ON/OFF key of the monitor.
The LED of the ON/OFF key is white.
The device starts up. This takes a few seconds.
The Vital signs tab is displayed.
You have the following options:
► Measure vital signs (without patient identification) ➔
signs
► Use full functional scope: Log in ➔
You must log in to the device if you want to do one of the following:
• Assign vital signs measurement to a seca patient file
• Analyze measured results
• Manage the system
English
Measuring vital
Logging in
Operation • 33