2. BASIC SETTINGS AFTER OS SETUP
2.1.4 DVD drive settings (for DVD multi-drive implementations)
For DVD multi-drive implementations, change the DVD drive settings as follows to allow
writes to DVD-RAM.
For DVD-ROM drive implementations, the following procedures are not needed.
1. Log on as a computer administrator if not already logged on as such.
2. Click the [Start] button, and then [My Computer].
3. The [My Computer] window is displayed.
• Right-click the [DVD-RAM Drive] icon, and choose [Properties] from the displayed
pop-up menu.
4. The [DVD-RAM Drive Properties] window is displayed. Click the [Recording] tab.
2-5