352 Breakdown assistance
Position the jack under the axle tube,
#
between the mounting brackets.
Trailing axle with air suspension
Position the jack under the jack support point
#
on the air suspension support.
Steered trailing axle
Position the jack so that the jack plunger is
#
centrally located under the axle carrier.
Removing a wheel
1 To loosen
2 To tighten
Using the wheel wrench, loosen 1 the wheel
#
nut covers and remove them.
Unscrew the wheel nuts that secure wheel
#
nut cover 1.
Remove wheel nut cover 1.
#
Remove the remaining wheel nuts.
#
Remove the wheel.
#
Vehicles with 14.00 R 20 twin tyres: remove
#
the wheel nuts for the inner wheel from the
connecting flange and then remove the con‐
necting flange.
Vehicles with 14.00 R 20 twin tyres: remove
#
the inner wheel.
Fitting a wheel
* NOTE Damage to wheel nuts or wheel
studs
Do not tighten the wheel nuts or wheel
#
studs with an impact wrench. They
could be damaged as a result.