Table of Contents
Advertisement
332 Maintenance and care
Reset the side window (
#
and the sliding sunroof
(
/
page 49).
Deactivate anti-theft protection on the audio
#
equipment (radio).
Set the local time on the tachograph.
#
Set the switch-on time for the auxiliary heat‐
#
ing system (
page 112).
/
Removing and fitting batteries (one above the
other)
* NOTE Damage to the battery carrier due
to excessive tightening torque
If you tighten the battery carrier screws using
an excessive tightening torque, the threaded
connections may be damaged.
Firmly tighten the screws on the battery
#
carrier with a tightening torque of 12
Nm. Do not use an impact wrench.
Removing
Remove the battery box cover.
#
Disconnect the negative terminal first, and
#
then disconnect the positive terminal.
Detach the connecting cable between the
#
batteries.
Unscrew screws
1
from the upper battery
#
carrier.
Pull out the upper battery carrier.
#
Unscrew screw
2
from upper securing
#
frame 3.
Remove securing frame 3.
#
Pull out the upper battery and the upper bat‐
#
tery carrier.
page 49)
/
#
#
#
#
#
Fitting
#
#
#
#
#
#
#
#
#
#
#
#
#
Removing and fitting batteries (one beside
the other)
Unscrew screws
1
from the lower battery
carrier.
Pull out the lower battery carrier.
Unscrew screw
2
from lower securing frame
3.
Remove securing frame 3.
Remove the lower battery and the lower bat‐
tery carrier.
Insert the lower battery carrier.
Place the battery onto the lower battery car‐
rier.
Position lower securing frame
in screw 2.
Push in the lower battery carrier.
Screw screws
1
into the lower battery car‐
rier.
Insert the upper battery carrier.
Place the battery onto the upper battery car‐
rier.
Position upper securing frame
in screw 2.
Push in the upper battery carrier.
Screw screws
1
into the upper battery car‐
rier.
Reconnect the connecting cable between the
batteries.
Reconnect the positive terminal first, and
then reconnect the negative terminal.
Replace the battery box cover.
* NOTE Damage to the battery carrier due
to excessive tightening torque
If you tighten the battery carrier screws using
an excessive tightening torque, the threaded
connections may be damaged.
Firmly tighten the screws on the battery
#
carrier with a tightening torque of 20
Nm. Do not use an impact wrench.
3
and screw
3
and screw
Advertisement
Table of Contents
