Activating/Deactivating Cruise Control; Selecting Cruise Control; Increasing/Reducing The Speed - Mercedes-Benz Actros Operating Instructions Manual

Hide thumbs Also See for Actros:
Table of Contents

Advertisement

I Press and briefly hold the button: selects
cruise control/the distance control assis‐
tant
Press and hold the button for a few sec‐
onds: selects the limiter
Ñ Activates and sets the current limit speed/
increases the set limit speed
q Activates and calls up the stored limit
speed/decreases the set limit speed
Deactivates cruise control
o
The é symbol in the on-board computer
shows the status of cruise control by colour:
grey symbol: cruise control is selected, but
R
not activated
white symbol: cruise control is activated and
R
maintains the set speed

Activating/deactivating cruise control

Requirements:
Cruise control maintains the set speed of the
vehicle for you. If the set speed is exceeded on
downhill gradients by more than the set speed
tolerance, the continuous brake is applied auto‐
matically.
If you are driving slower than 15 km/h, cruise
control cannot be activated.
If cruise control cannot be activated, the on-
board computer displays the
in grey.
Cruise control is automatically deactivated in the
following situations:
you are driving at less than 10 km/h.
R
you shift the transmission to neutral for more
R
than five seconds.
If cruise control is deactivated automatically, a
warning tone sounds.

Selecting cruise control

#
Activating while driving
#
#
or
#
#

Increasing/reducing the speed

You can change the speed setting while driving.
#
#
or
#
Driving tips
Cruise control maintains the set speed more
smoothly in the
grams. For this reason, the driving speed and the
set speed may differ slightly under certain cir‐
cumstances. This leads to lower fuel consump‐
- - - km/h
message
tion. In the
grams, the speed can be set to a maximum of
85 km/h, and in the
to a maximum of 82 km/h. In the
A economy +
set speed by depressing the accelerator pedal,
e.g. when overtaking.
You can decelerate using the continuous brake.
Cruise control remains activated.
Driving mode 237
Press the I button repeatedly until the
on-board computer shows the é symbol in
grey.
Select cruise control.
Drive at the desired speed and briefly press
the Ñ button.
Cruise control is activated and the current
speed is stored.
Briefly press the q button.
Cruise control is activated and assumes the
stored speed.
The on-board computer shows the é sym‐
bol and the set speed in white.
Release the accelerator pedal.
In order to maintain the set speed, cruise
control automatically brakes or accelerates
the vehicle.
Activate cruise control.
To adjust in 0.5 km/h increments: press
the q or Ñ button repeatedly until the
desired speed is shown in the on-board com‐
puter.
To adjust in 5 km/h increments: press and
hold the q or Ñ button until the
desired speed is shown in the on-board com‐
puter.
A economy
and
A economy
and
A fleet
A economy +
drive programs, you can exceed the
A fleet
drive pro‐
drive pro‐
drive program,
A economy
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arocs

Table of Contents