Table of Contents
Advertisement
Function seat
Before adjusting the seats, read the section
"Notes on the seats".
Adjusting the armrests:
#
Fold up armrests 1.
R
Use the handwheel on the underside to
R
adjust the angle of armrests 1.
Adjusting the seat backrest:
#
Lift your weight off the seat backrest.
R
Pull lever
3
up and hold it in place.
R
Move the seat backrest into the desired
R
position by applying pressure to or lifting
your weight off it.
Release lever 3.
R
Folding up the seat cushion: Fold up seat
#
cushion
2
until it engages.
Folding down the seat cushion:
#
Push seat cushion
2
R
backrest and release it.
Fold down seat cushion 2.
R
Beds and berths
Overview of beds and berths
The following beds/berths can be installed in the
L cab:
Wide/narrow top bed (
/
R
Top bed (car transporter with two beds)
R
(
page 59)
/
Top bed, folding (
page 59)
/
R
Bottom bed (
page 60)
/
R
Seat/berth combination (
R
SoloStar Concept (
page 64)
/
R
Information on the climbing aid
Use the surface on the engine tunnel as a climb‐
ing aid for the top bed.
Folding the top bed up/down
& WARNING Risk of injury or death if the
Any vehicle occupant using a bed while the
vehicle is in motion cannot be restrained
properly.
#
* NOTE Damage to the bed and seats
Make sure that the bed does not come into
contact with the seats when it is folded up
and down.
If it does, both components could be dam‐
aged.
#
against the seat
Top bed
page 59)
page 62)
/
Driver cockpit
berth is used while the vehicle is in
motion
Use the bed only when the vehicle is
parked.
Fold the backrests of the driver's and
front passenger seats forwards or move
the seats further forwards.
59
Advertisement
Table of Contents
