298 Driving mode
Mercedes-Benz recommends that you have the
wind deflector adjusted at a qualified specialist
workshop.
When adjusting the wind deflector, make sure
that you:
do not exceed the permissible vehicle height
R
(for international transport 4 m).
observe the maximum headroom clearance of
R
underpasses.
comply with the legal requirements for the
R
country you are currently in.
%
When measuring the clearances, park the
vehicle on an even surface. If in doubt,
always select a higher setting of the wind
deflector.
Determine which diagram corresponds to
#
your vehicle.
Measure clearance S between the door soffit
#
and body.
Measure height difference H between the
#
door sill and body.
Identify adjustment detent A in the diagram
#
with height difference H.
Unscrew the screws
1
#
rails on both sides of the vehicle.
#
#
Wind deflector diagrams
S cab ClassicSpace 420 platform vehicle
M cab ClassicSpace 420 platform vehicle
L cab ClassicSpace 420 platform vehicle
S cab ClassicSpace 600 platform vehicle
on the adjustment
Using the determined adjustment detent A,
adjust the adjustment rails on holder 2.
Screw in the screws 1.