Table of Contents
Advertisement
* NOTE Damage to the head section and
the bottom berth
When adjusting the seat fore-and-aft
#
position, ensure that the head section
of the bottom berth is fully lowered.
Otherwise, the head section could come
into contact with the seat, resulting in
damage to both components.
* NOTE Damage to the suspension seat
Ensure that the suspension seat can swing
freely. In particular, ensure that the lock on
the bed does not rub against the back of the
seat.
Store the lock on the bed in such a way
#
that it does not rub against the back of
the suspension seat, e.g. under the mat‐
tress.
Standard/comfort/climatised static, centre
and suspension seats
Read the safety notes concerning the seats
before adjusting them. Depending on the seat
model, certain adjustment options may not apply.
When adjusting the seats, make sure that
#
there is sufficient clearance behind the seat
in particular.
Adjusting the top part of the seat back‐
#
rest:
Pull lever
1
on the rear of the seat back‐
R
rest up and hold it in place.
Tilt the top part of the seat backrest into
R
the desired position.
Release lever 1.
R
Folding the seat backrest: Pull lever
#
and fold the seat backrest forwards or back.
Adjusting the neck cushion:
#
Press the buttons on the rubber straps
R
and adjust neck cushion
tion appropriate for your height.
Release the buttons.
R
Adjusting the seat belt height:
#
Press and hold the button on belt sash
R
guide 4.
Adjust belt sash guide
R
appropriate for your height.
Release button 4.
R
Adjusting the armrests:
#
Fold up seat armrests 5.
R
Use the handwheel on the underside to
R
adjust the angle of seat armrests 5.
Adjusting the vibration damper: Use lever
#
6
to adjust the vibration damper in incre‐
ments such that the seat does not bottom
out.
Adjusting the seat cushion length:
#
Pull lever
7
up and hold it in place.
R
Push the seat cushion back/forwards
R
until it is in the desired position.
Release lever 7.
R
Engaging the fore-and-aft seat damping
#
lock: Raise lever 8.
The fore-and-aft seat damping will engage
and the seat suspension will be locked.
Releasing the fore-and-aft seat damping
#
lock: Lower lever 8.
The seat will be able to vibrate.
Using the easy entry and exit feature:
#
Press button 8. The seat will be lowered
R
fully.
Press button 9. The seat will return to
R
the last height set.
Adjusting the seat cushion angle:
#
Driver cockpit
57
2
up
3
to the posi‐
4
to the position
Advertisement
Table of Contents
