Folding underride guard – tipper with air sus‐
pension
Example: lever, left-hand side of the vehicle
d Off-road position
e Road position
r Road paver operation position
Hold the underride guard
#
Swing both levers
2
to position 2.
#
The underride guard
1
Swing the underride guard
#
desired position and hold it in place.
Swing both levers
2
to position 1 and
#
release the underride guard 1.
The underride guard
1
%
If you swing the underride guard
road paver operation position r, leave both
levers
2
in position 2.
Road paver mode
Preparing road paver mode
Example: mud flap, left-hand side of vehicle
#
#
#
Notes on road paver mode
Tipper with steel suspension
1
in place.
Tipper with steel suspension in road paver mode
will be released.
(overrun mode)
1
into the
In road paver mode, the roller of the road paver
presses against the tyres. This causes the vehicle
to be pushed forwards at the speed of the road
finishing machine. Do not use the parking brake
will be locked.
in overrun mode and only perform slight adaptive
1
into the
braking with the service brake.
Tipper with air suspension
& WARNING Risk of being trapped
Set the underride guard to the road paver
operation position.
Swing both mud flaps
2
plate bracket.
Attach the rings of mud flaps
on the licence plate bracket.
between tyres and underride guard
When the underride guard is pressed against
the tyres, persons could become trapped
between the tyres and the underride guard.
Driving mode 269
up over the licence
2
to hooks
1