Folding The Bottom Bed Up/Down; Folding Down The Top Bed (Car Transporter); Folding The Top Bed Upwards (Car Transporter) - Mercedes-Benz Actros Operating Instructions Manual

Hide thumbs Also See for Actros:
Table of Contents

Advertisement

60
Driver cockpit
If the vehicle is parked on an incline, you can
move the wide top bed into the horizontal posi‐
tion. To do so, adjust the angle of the wide top
bed.
Move or fold the backrests of the driver's and
#
front passenger seats forwards.
If necessary, slide the driver's and front
#
passenger seats an adequate distance for‐
wards.
Folding down and adjusting the angle:
#
Press and hold release buttons 2.
Swing the bed down.
#
Align the bed horizontally with the aid of the
#
spirit level on bracket
3
angle of the bed.
To make the bed fully aligned, slide bracket
3
along the bed frame. It is also possible to
unclip bracket
3
at the bottom and to clip it
back on at the other end of the bed. The air
bubble in the spirit level should sit between
the marker lines at all times.
Let go of release buttons 2.
#
Retaining straps
1
will automatically engage
and the bed will be held at this angle.
Folding up: Swing the bed upwards as far as
#
it will go.

Folding down the top bed (car transporter)

#
#
#
#
#

Folding the top bed upwards (car transporter)

#
and correct the
#

Folding the bottom bed up/down

* NOTE Damage to the bed and seats
Make sure that the bed does not come into
contact with the seats when it is folded up
and down.
If it does, both components could be dam‐
aged.
#
* NOTE Damage to the bed or other com‐
If the bed is not folded down in the event of
an accident, the rubber mounts may detach
from the wall brackets.
Move or fold the backrests of the driver's and
front passenger seats forwards.
If necessary, slide the driver's and front
passenger seats an adequate distance for‐
wards.
Lift the bed slightly, hold it in place and press
the release buttons on both strap buckles 2.
Pull out retaining strap tongues
buckles 2.
Swing the bed down.
Swing the bed upwards and hold it in place.
Push retaining strap tongues
2
until they engage audibly.
Fold the backrests of the driver's and
front passenger seats forwards or move
the seats further forwards.
ponents
1
from both
1
into buckles

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arocs

Table of Contents