Table of Contents
Advertisement
Press the handle
3
down slightly at the end
#
stop and let it go.
The screen will be hooked in.
Closing the sliding sunroof mechanically
%
The hexagon socket wrench for opening the
sliding sunroof can be found in the vehicle
document wallet.
Vehicles with a ClassicSpace/CompactSpace
cab
Vehicles with a ClassicSpace cab: remove the
#
cover cap 1.
Vehicles with a CompactSpace cab: remove
#
the cover 2.
Opening and closing
Insert the hexagon socket wrench
#
actuator motor through the opening provided
and turn it clockwise until the sliding sunroof
is completely closed.
Vehicles with a ClassicSpace cab: attach the
#
cover cap 1.
Vehicles with a CompactSpace cab: fit the
#
cover 2.
Vehicles with a Big-/Stream-/GigaSpace cab
Pull the blackout screen
#
the roof frame using the handle.
Turn the guide bar
1
for the screen and
#
remove it from the screen guides on both
sides of the roof frame.
Carefully guide the blackout screen
#
until the screen stops and allow it to hang in
the cab.
Remove the insect roller screen
#
screen guide in the roof frame, as previously
51
3
into the
2
to the middle of
2
back
3
from the
Advertisement
Table of Contents
