Table of Contents
Advertisement
Starting/ending mobile phone voice recogni‐
tion
Requirements:
The mobile phone in the foreground is con‐
R
nected with the multimedia system
(
page 178).
/
Starting mobile phone voice recognition
Press and hold the £ button on the multi‐
#
function steering wheel for at least one sec‐
ond.
You can now use the mobile phone voice rec‐
ognition.
To end mobile phone voice recognition
Press the 8 or ~ button on the multi‐
#
function steering wheel.
%
If a mobile phone is connected via the smart‐
phone integration, the voice recognition of
this mobile phone is started or stopped.
Calls
Telephone operation
Multimedia system:
©
Phone
4
5
Making a call by entering the numbers
Select _.
#
Enter a number.
#
Select R.
#
The call is made.
Accepting a call
Select R Accept.
#
Rejecting a call
Select k Reject.
#
Ending a call
Select k
beenden
(End) .
#
Putting a call on hold and rejecting a call
Select
Call on
hold.
#
The call is put on hold or rejected.
Depending on the mobile phone, behaviour
when rejecting a call may vary (see manufac‐
turer's operating instructions).
When the call is on hold: select Rejectk.
#
The call is rejected.
Multimedia system 181
Activating functions during a call
The following functions are available during a call:
k
End call beenden
(End)
m
Microphone
_
Numerical
(show to send DTMF tones)
h
Transfer to
(an active call in hands-free
mode is transferred over to the telephone)
Select a function.
#
Putting an active call on hold
Tap on the contact or the call.
#
The call is put on hold.
%
The call on hold can be ended any time or re-
activated by tapping again.
Conducting a call with several participants
Requirements:
There is an active call (
/
R
Another call connection has been estab‐
R
lished.
Switching between calls
To switch call: select Q
#
wechseln
(Switch calls).
Select the contact.
#
The selected call is active. The other call is on
hold.
Activating a call on hold
Select the contact for the call on hold.
#
Ending the active call
Select k
End call beenden
#
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
Accepting/rejecting a waiting call
Requirements:
There is an active call (
/
R
If there is an incoming call while a call is being
conducted, a notification is shown.
Depending on the mobile phone and the mobile
phone network provider you will hear a knocking
sound.
In addition, you will hear an acoustic signal in two
phone mode, if the call is incoming on the other
(still not active) mobile phone.
Select R Accept.
#
The incoming call is active.
page 181).
Switch calls
(End).
page 181).
Advertisement
Table of Contents
