Table of Contents
Advertisement
326 Maintenance and care
Do not open the maintenance flap if a
#
wiper arm is folded forward.
Do not fold the wiper arms back without
#
the wiper blade.
Wiper blades are wear parts. Replace the wiper
blades at least once a year. Otherwise, the wind‐
screen will not be wiped properly.
Removing the wiper blades
Fold the wiper arms
3
#
screen.
Remove the hose
2
from the pipe jet.
#
Push the wiper blade in the direction of the
#
arrow
1
as far as it will go onto the wiper
arm.
Slide the catch
2
in the direction of the
#
arrow
3
until it engages in the removal posi‐
tion.
Remove the wiper blade in the direction of
#
the arrow
4
away from the wiper arm.
Fitting the wiper blades
#
#
#
#
Checking/topping up the motor oil
Checking the oil level
away from the wind‐
#
#
Topping up the engine oil
Insert the new wiper blade into the wiper arm
in the direction of the arrow 1.
Slide the catch
2
in the direction of the
arrow
3
until it engages in the locking posi‐
tion.
Make sure that the wiper blade is seated cor‐
rectly.
Fold the wiper arms back onto the wind‐
screen.
Check the oil level using the on-board com‐
puter (
page 124).
/
Only use oils approved for the vehicle and
which meet the specified SAE classifications
(
page 385).
/
* NOTE Engine damage caused by driving
with excess engine oil
Avoid long journeys with excess engine
#
oil.
Advertisement
Table of Contents
