Switching The Illuminated Mercedes Star On And Off; Switching The Rotating Beacon On And Off - Mercedes-Benz Actros Operating Instructions Manual

Hide thumbs Also See for Actros:
Table of Contents

Advertisement

80
Driver cockpit
When significant steering movements are
made, the combination switch will automati‐
cally reset itself.
To flash briefly: when you are overtaking or
#
changing lanes, briefly tap the combination
switch in the desired direction to indicate
right
1
or indicate left 2.
The corresponding turn signal lamps and
the , or . indicator lamp on the
instrument cluster will flash five times.
To cancel brief flashing: briefly tap the com‐
#
bination switch in the opposite direction.
The corresponding turn signal lamps and
the , or . indicator lamp on the
instrument cluster will flash.
Switching the illuminated Mercedes star on
and off
The illuminated Mercedes star on the mainte‐
nance flap is approved exclusively for use on pri‐
vate land. Use on public roads is prohibited, e.g.
also in public parking areas.
Due to legal stipulations, deviations from the use
of the illuminated Mercedes star described here
are possible in some countries. Observe the legal
requirements for your current location.
To switch on: press the upper section of the
#
Ú switch.
The indicator lamp on the Ú switch will
light up.
To switch off: Press the lower section of the
#
Ú switch.
The indicator lamp on the Ú switch will go
out.

Switching the rotating beacon on and off

Rotating beacon button in the overhead control
panel (example)
To switch on/off: press the À button.
#
When driving the vehicle with a rotating beacon,
observe the legal requirements for the country in
which you are currently driving. If the required
field of vision is not satisfied due to trailers, bod‐
ies or attachments, secure the vehicle using addi‐
tional lights.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arocs

Table of Contents