Table of Contents
Advertisement
162 Multimedia system
%
The correct time is a requirement for the fol‐
lowing functions:
Route guidance with time-dependent traf‐
R
fic routing
Calculation of the expected time of arrival
R
Alarm function
R
Setting the time zone
Requirements:
To set the time zone manually: the
R
matic time zone
function is deactivated.
Multimedia system:
©
Operation
4
5
Display & operation
5
5
Setting the time zone manually
Select
Time
zone:.
#
The list of countries is displayed.
%
If several time zones are available in a coun‐
try these will be shown after selection of the
country.
Select a country and time zone if required.
#
The time zone set will be shown after
zone:.
Setting the time zone automatically
Activate
Automatic time
#
Setting the time and date format
Multimedia system:
©
Operation
4
5
Display & operation
5
5
Set format
5
Set the date and time format #.
#
Setting the time and date manually
Requirements:
The
Manual time adjustment
R
switched on.
For setting the date manually: no GPS or
R
tachograph is installed in the vehicle.
Multimedia system:
©
Operation
4
5
Display & operation
5
5
Setting the time
Select
Set
time.
#
Set the time.
#
%
Setting the date
#
#
%
Auto-
Setting the alarm clock
The
Settings
5
alarm clocks in a carousel. If the maximum num‐
Time and date
ber of alarm clocks has not yet been reached,
new alarm clocks can be added using the plus
sign on the right-hand side. When the maximum
number of alarm clocks has been reached, the
"Plus" button is not shown.
Pressing a button switches between the active
and inactive status of an alarm clock.
An alarm clock is activated in the following cases:
R
Time
R
An alarm is deactivated in the following cases:
zone.
R
R
Settings
5
Multimedia system:
Time and date
4
5
#
#
function is
An alarm clock shows the following information:
R
R
Settings
5
R
Time and date
In vehicles with GPS the time is set automati‐
cally via the selected time zone.
Select
Set
date.
Set the date.
In vehicles with GPS the date cannot be set
even if the time is adjusted manually. The
date is set automatically via the selected
time zone.
ALARM
menu shows buttons for up to 15
A button for an inactive alarm clock is
pressed.
A new alarm clock is set up.
A button for an active alarm clock is pressed.
An alarm clock for which no day for repetition
has been selected will be triggered once.
©
Operation
5
5
ALARM
Press the "Plus" button.
An alarm clock with the preset values is set.
Open Edit.
The corresponding button is shown in the dis‐
play.
whether the alarm clock is active or inactive
the time set
the weekdays for which the repeat is set:
if all the active weekdays are consecutive,
-
then
Mon
to
Fri
is shown, for example.
Timer control
Advertisement
Table of Contents
