Table of Contents
Advertisement
50
Opening and closing
During opening and closing, make sure
#
that no body parts are in the sweep of
the sliding sunroof / pop-up roof.
Release the button immediately if some‐
#
body becomes trapped.
or
Press the upper section of the button
#
again.
The closing process will be stopped.
Opening the sliding sunroof / pop-up roof
Briefly press the upper section of the ¸
#
button.
The sliding sunroof will move into position.
The pop-up roof will open completely.
To stop the movement, press the ¸ or
#
P button again.
With a sliding sunroof, press the upper sec‐
#
tion of the ¸ button and hold it until the
sliding sunroof has reached the desired posi‐
tion.
Closing the sliding sunroof / pop-up roof
With a sliding sunroof, press and hold the
#
P button until the sunroof has reached
the desired position.
or
Briefly press the lower section of the P
#
button.
The sliding sunroof or pop-up roof will close
completely.
To stop the movement, press the P or
#
¸ button.
In the event of a malfunction or when the battery
has been disconnected, you can also close the
sliding sunroof or pop-up roof mechanically.
Reset the sliding sunroof after a malfunction or
voltage supply interruption.
Opening the blackout screen / insect roller
screen
The pop-up roof is fitted with a cover frame and
integrated insect protection. The cover frame can
be removed for cleaning purposes.
The sliding sunroof is fitted with an insect roller
screen
1
and a blackout screen 2. With a slid‐
ing sunroof, you can only ever close one screen.
Push the handle
3
on the screen as far as it
#
will go in the closing direction.
Push the handle
3
upwards and unhook the
#
screen.
Guide the screen back to the opposite end of
#
the roof frame and release the handle 3.
Closing the blackout screen / insect roller
screen
Pull the handle
3
on the screen up to the
#
opposite end of the roof frame.
Advertisement
Table of Contents
