Table of Contents
Advertisement
314 Maintenance and care
Notes on cleaning and care
Displays
Carefully clean the surface with a
R
cotton or microfibre cloth.
For heavy soiling: use care product
R
recommended for Mercedes-Benz.
Cloth seat
Clean the entire seat cover with a
R
covers
damp microfibre cloth and a 1%
soapy water solution. Do not spot-
clean.
Imitation
Clean the entire seat cover with a
R
leather seat
damp cotton cloth and a 1% soapy
covers
water solution. Do not spot-clean.
Genuine
Regularly clean the entire seat cov‐
R
leather seat
ers with a damp cotton cloth.
covers
Use leather care agents that have
R
been recommended for Mercedes-
Benz for aftertreatment.
Steering
Clean with a damp cloth.
R
wheel and
Use leather care agents that have
R
gearshift
been recommended for leather
lever
upholstery for Mercedes-Benz.
Notes on use of a high-pressure cleaner
& WARNING Risk of an accident when
using high-pressure cleaners with circular
jet nozzles
The water jet of a circular jet nozzle (dirt
grinder) can cause externally invisible dam‐
age to the tyres or chassis parts.
Components damaged in this way may unex‐
pectedly fail.
Do not use high-pressure cleaners with
#
circular jet nozzles to clean the vehicle.
Have damaged tyres or chassis parts
#
replaced immediately.
* NOTE Damage due to using a high-pres‐
sure cleaner in the vehicle interior
The pressurised water created by the high-
pressure cleaner and the associated spray
could cause considerable damage to the vehi‐
cle.
Avoiding vehicle damage
Switch off the display and let it cool
R
down first.
Do not use solvent-based care prod‐
R
ucts and cleaning agents.
Do not use polishes or abrasive
R
cleaning agents.
Do not use any oil-based cleaning
R
and care products.
Do not use a microfibre cloth.
R
Do not use a microfibre cloth.
R
Do not soak the leather.
R
Do not allow fluids with sticky ingre‐
R
dients to come into contact with the
steering wheel or the steering-wheel
buttons.
Never use a high-pressure cleaner in the
#
vehicle interior.
* NOTE Component damage due to using a
high-pressure cleaner
The following components can be damaged
by directly spraying them with a high-pressure
cleaner:
door gaps
R
air suspension bellows
R
brake hoses
R
balance weights
R
electrical components
R
electrical connectors
R
seals
R
Do not aim the water jet at these com‐
#
ponents.
When using a high-pressure cleaner, keep a mini‐
mum distance of approximately 30 cm between
the high pressure nozzle and the vehicle parts.
Advertisement
Table of Contents
